Publicidad
Idiomas disponibles
Idiomas disponibles
WEAPON SAFETY
PLEASE BE SURE TO READ, UNDERSTAND AND FOLLOW THESE SAFETY AND
OPERATING INSTRUCTIONS WHEN HANDLING A FIREARM OR THE NIGHTSTICK
TWM WHEN MOUNTED ON A FIREARM. FAILURE TO DO SO CAN BE DANGEROUS
AND COULD RESULT IN SERIOUS INJURY, DAMAGE TO PROPERTY, OR DEATH.
y Use of a firearm under any circumstance is inherently dangerous. SERIOUS
INJURY OR EVEN DEATH may result without proper training in the safe
handling of firearms. Proper training should be obtained from an accredited
firearms safety program conducted by a qualified instructor.
y Read, understand and follow all of the safety instructions that came with your
firearm before attaching your new TWM.
y Always assume every firearm is loaded and treat that firearm as such.
y Never point a firearm at anything that you are not willing to destroy.
y Never service your firearm or your TWM when mounted on a firearm without
first activating the weapon's safety (if applicable), removing the magazine,
opening the action and physically and visually inspecting to make sure that
no ammunition is installed in the firearm.
y Thoroughly practice (employing safe training conditions) with the TWM and
an unloaded firearm before using the weapon.
BEFORE ATTACHING, INSPECTING OR SERVICING THE TWM
y Engage the safety on the firearm (if applicable).
y Remove the magazine from the firearm (if applicable).
y Open the action and visually and physically inspect the chamber to be sure
it is empty.
y Keep the barrel pointed in a safe direction at all times and never place your
hand in front of the muzzle.
WARNING: FAILURE TO DO SO COULD RESULT IN AN ACCIDENTAL DISCHARGE
AND SERIOUS INJURY, DAMAGE TO PROPERTY, OR DEATH.
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.nightstick.com
QSG-TWM-852XLG2-19
Publicidad
