Latching The Cooler Lid; Setting The Temperature; Switching Off The Cooler - Mobicool MCG15 Instrucciones De Uso

MCG15
I
NOTE – Displayed temperature
The temperature displayed is that of the middle of the interior. The
temperature elsewhere can deviate from this temperature.
I
NOTE
When operating from a battery, the display switches off automati-
cally if the battery voltage is low.
To avoid food waste, note the following:
 Keep temperature fluctuation as low as possible. Only open the cooling
box as often and for as long as necessary. Store the foodstuff in such a way
that the air can still circulate well.
 Adjust the temperature to the quantity and type of the foodstuff.
 Foodstuff can easily absorb or release odor or taste. Always store food-
stuff covered or in closed containers/bottles.
6.6

Latching the cooler lid

➤ Lift the latch (fig. 1, page 3) and close the lid.
➤ Release the latch.
✔ The latch audibly clicks in place and secures the cooling device lid.
6.7

Setting the temperature

➤ To unlock the buttons press the
✔ A beeping sound confirms the unlocking.
➤ To enter setting mode press the
➤ To enter temperature settings press the
➤ Use the "+" (fig. 2 3, page 3) and "–" (fig. 2 5, page 3) buttons to select
the cooling temperature.
✔ The set temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
6.8

Switching off the cooler

➤ Empty the cooler.
EN
button for 3 seconds(fig. 2 4, page 3).
button once.
button once.
Operation
13