Fitting The Electric Components - Festo SPC11 ASI Serie Guía De Referencia Rápida

4

Fitting the electric components

Example of fitting electric drive type DGP(L)−... and
measuring system type MLO−POT−...−TLF. Use only the orig
inal cables specified.
1 2
1
AS−Interface master
2
AS−Interface combi power
pack
3
AS−Interface bus
(yellow AS−Interface cable)
4
Operating voltage
(black AS−Interface cable)
Connect an earth cable with sufficient cross−sectional area
to the drive if the drive is not fitted on an earthed machine
stand.
Special earthing measures for components other than
those shown here can be found in the system manual for
the SPC11−...−ASI.
22
3
ASI +
ASI −
5
6
4 5
With linear drives, end posi
tion 1 lies on the side with
the electrical connections to
the measuring system.
Earthing
Festo SPC11−...−ASI 0511b English
6