Setting The Parameters By Means Of The Speed Controller Setup Button - Carson MODEL SPORT DRAGSTER SHOOTER 6SL Instrucciones

7. Setting the Parameters by Means of the Speed
Controller Setup Button
The speed controller can be operated immediately after it has been
synchronized with the transmitter. However, specific parameters can be
adjusted to suit particular conditions.
The controller is programmed using the SET button. When you press the
button down, different LEDs and combinations of LEDs flash one after the
GB
other. Each LED combination represents a particular menu which can be
selected and set by releasing the SET button at the required combination.
The following parameters may be selected:
• Battery type (NiCd/NiMH, LiPo), Cut-Off
• Training journey/racing mode
• Braking action 0% - 70%
• Percentage drag brake when the throttle/braking lever is in neutral
0% - 45%
• Dead band Level 1 – 5
• Driver profile 1 - 5: Select from four pre-programmed settings for
throttle/brake.
Profile 5 resets the speed controller to the factory defaults.
You have various tuning options within the individual menu items. These
are distinguished by the flashing frequency of individual or several LEDs,
and are selected by pressing the SET button.
When you select the menu item, the LED flashes/LEDs flash in the
frequency of the previously selected option.
32 CARSON DRAGSTER Brushless Controller