Clarity XLC3.4+ Guia Del Usuario página 12

XLC7HS
Difficulty in placing or receiving calls:
• Move closer to the base and try again.
• Make sure you have selected the correct dialing mode, tone
or pulse.
• Make sure the handset battery is fully charged.
Screen displays "Battery Low":
• Handset batteries are low on charge; return the handset to the
base to recharge the batteries.
TALK button is blinking green (fast pace):
• The base is trying to locate the handset; press TALK to end the
FIND paging process and return the handset to the base.
Your handset screen is displaying "Searching...":
• Move closer to the base.
• To register the XLC7HS, place the XLC7HS handset into the main
unit until the screen displays: Handset Registered. It will take ap-
proximately 5-10 seconds for the handset to register to the base.
• Verify that the AC adapter is plugged into the base and into the
wall outlet.
• The handset is out of range or the power to the base is
unplugged.
• Place the handset into the base until the screen returns to
standby mode. It will take approximately 5-10 seconds for the
handset to register to the base.
• Handset may need to be re-registered to the base manually.
Follow the instructions on page 8.
12
TROUBLESHOOTING