Electrical Connections - Gewiss CHORUS GW10705 Manual De Instrucciones

INSTALLATION INSTRUCTIONS
Important: the installation and electrical connecting of the devices and appliances must be
undertaken by qualified personnel and in accordance with standards and regulations in for-
ce at the time. The manufacture declines to accept any responsibility concerning the use of
the products in accordance with particular environmental or installation regulations, as this
responsibility rests entirely with the installer.
Warning: Prior to installing the product, ensure the mains electrical supply is disconnected.
With the mains power supply disconnected:
Connect the power supply wires to terminals:
Connect the wires of the device to be controlled to terminals:
With strong inductive loads (pumps and solenoid valves) it is recommended that an RC
filter is connected in parallel to the load.

Electrical connections

Cabling terminals
Power supply :
Output relay:
15
n° L (Line) and n° N (Neutral).
n° 1 = NA contact
n° 2 = common
n° 3 = NC contact
L - Phase
N - Neutral
1 = NA contact
2 = common
3 = NC contact
E
N
G
L
I
S
H
E
N
G
L
I
S
H