Repeating Play; Playing Tracks In A Random Order; Scanning Folders And Tracks; Pausing Mp3/Wma/Wav Playback - Pioneer DEH-27MP Instrucciones Sobre El Funcionamiento

MP3/WMA/WAV Player

Repeating play

For MP3/WMA/WAV playback, there are three
repeat play ranges: FRPT (folder repeat), RPT
(one-track repeat) and disc repeat.
% Press 5 to select the repeat range.
Press 5 until the desired repeat range appears
in the display.
! RPT  Repeat just the current track
! FRPT  Repeat the current folder
! Track number (e.g., T04)  Repeat all tracks
Notes
! If you select another folder during repeat play,
the repeat play range changes to disc repeat.
! If you perform track search or fast forward/re-
verse during RPT, the repeat play range
changes to FRPT.
! When FRPT is selected, it is not possible to
play back a subfolder of that folder.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, FRPT
(folder repeat) and disc repeat.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
# If you turn random play on during FRPT,
FRDM appears in the display.

Scanning folders and tracks

While you are using FRPT (folder repeat), the
beginning of each track in the selected folder
plays for about 10 seconds. When you are
using disc repeat, the beginning of the first
track of each folder is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press 3 to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track of the current folder (or the
first track of each folder) is played.
# If you turn scan play on during FRPT, FSCN
appears in the display.
3 When you find the desired track (or
folder) press 3 to turn scan play off.
# After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
% Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis-
play.
# You can also turn pause on or off by pressing
PAUSE.

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
% Press 2 to select the search method.
Press 2 until the desired search method ap-
pears in the display.
! FF/REV  Fast forward and reverse
! ROUGH  Searching every 10 tracks
Searching every 10 tracks in
the current folder
If the current folder contains over 10 tracks,
you can search every 10 tracks. When one
folder contains a lot of tracks, you can roughly
search for the track you want to play.
Section
06
13
En