Descargar Imprimir esta página

AGPtek C2S Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
the station can be added by [Station list], [Manual Tune], [Auto Tune].
2.If you can't search for an FM radio station, or if the FM sound quality is not
good, please try adjusting the position of the wired headset or antenna. In
some remote places, the FM signal may be poor. Please contact the local staff
working in FM broadcasting to confirm whether the FM signal is covered or
not.
3.FM radio supports listening with the wired earphones connection/Bluetoot
h connection
1) Wired earphones listening: Before turning on the FM radio, you should con
nect to the wired earphones for listening;
2) Bluetooth connection listening: You can use the wired earphones
or antenna to receive the signal, and then connect Bluetooth devices.
Bluetooth
Find "Bluetooth" on Home menu and tap
to access to its function.
 Bluetooth On/Off:
Choose to enable or disable Bluetooth.
 Bluetooth On/Off memory.
Choose On-the player will connect with devices that have been connected by
its Bluetooth automatically, when you turn on the player next time.(The
Bluetooth devices must be powered on and unoccupied)
 Search for device:
When the Bluetooth is enabled, choose "Search for device" to search the
nearby devices, then all of the devices which has opened its Bluetooth will be
listed.
 Device List:
Choose from the available devices and select to connect/disconnect. Select the
device you want to connect, and then click to connect. After successfully
connected, this player is ready to play music or FM radio by Bluetooth
earphones, Bluetooth speaker, etc.
Note:
- Please open the Bluetooth of the device at first if you want to connect with
5

Publicidad

loading

Este manual también es adecuado para:

C2h