Motorola PMLN6242 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
TROUBLESHOOTING
When troubleshooting, always observe the color of the LED.
Problem
No charger
1a.
indication
1b.
Blinking Red
2a.
Indication
2b.
Blinking
3.
Orange
Indication
Table 2. Troubleshooting
What it means...
Charger contact is
not being made.
No power to the
charger.
Charger contact is
not being made.
Battery is not
chargeable
Battery is waiting
to charge. The
battery
temperature may
be below 5 °C
(41 °F) or above
40 °C (104 °F) or
the battery voltage
may be lower than
the predetermined
threshold level for
rapid charging.
What to do...
1a.
Check that the radio with
battery, or the battery alone,
is inserted correctly.
1b.
Make sure that the power
cord is securely plugged
into the charger and an
appropriate AC outlet, and
that there is power to the
outlet.
2a.
Remove the battery from
the charger and replace it
back into the charger.
• Verify that the battery is a
Motorola Solutions-
authorized battery listed
in Table 5. Other
batteries may not charge.
• Remove power from the
battery charger and,
using a clean dry cloth,
clean the gold metal
charging contacts of both
the battery and the
charger.
2b.
Replace battery.
3.
When this condition is
corrected, the battery will
begin charging
automatically
(Steady Red LED).
6

Publicidad

Tabla de contenido
loading

Tabla de contenido