Intended Use; Features - Olympia A 8250 C Manual Del Usuario

Intended Use

This laminator can be used for the hot lamination of foil pockets with a
thickness between 80 and 250 μm and a maximum size of A3. It can be
used to laminate photos, cards, documents, paper etc. with a max. thickness
of 0.8 mm and a weight between 70 and 80 g/m².
Any other use is considered unintended use.
Unauthorised modifications or reconstructions are not permitted.

Features

Protection and refinement of your documents.
Laminate photos, documents, graphics etc. up to A3 size.
The unit operates using 4 heating rollers, has a quick warm-up phase and
laminates without a carrier.
• 2 LED lamps indicate the operating status.
• Automatic switch-off in the event of overheating
• High quality heating system prevents smudging and blistering
• Warm-up phase of 4 - 6 minutes
• Cool down phase to room temperature, approx. 30 minutes.
• Foil thickness, minimum 80 μm and maximal 250 μm.
Laminating system:
Maximum laminating width:
Maximum lamination thickness:
Laminating speed:
Power supply:
Power consumption:
Dimensions (L x W x H):
Weight:
Hot roller technology,
4 transport rollers
330 mm
0.8 mm
0.8 m/min
220 - 240 Volt / 50 Hz
5.5 A
541 x 213 x 139 mm
Approx. 6.7 kg
15