2
3
1
NOTE:
Ensure that the centering collar of the nerf bars fits into the
recesses of the footrests.
Mount screw M8x25 and washer A8.4 on the left and right on the lower
fixing point of the footrest.
Align the nerf bars so that they are not under strain and tighten the screws
in the following sequence:
1. Screws on the lower fixing point of the footrests.
2. Screws on the upper fixing point of the footrests.
3. Screw on the nerf bar support.
Mounting the net
NOTE:
The net supports of the nerf bars have three slots each: bottom (1),
top (2) and center (3). Thread the individual net straps from the
top to the bottom through the upper and lower slots of the net
supports.
Insert the strap ends through the center slot and then through the upper slot
of the net supports.
7