Complete The Installation - Kohler K-2313 Guia De Instalacion

Sealant
As Viewed From Below
5. Install the Lavatory to the Lavastone Countertop/Wall-Mount Vanity
CAUTION: Risk of personal injury. Natural lavastone is an extremely dense, heavy material. Do not
attempt to lift or install lavastone countertops without assistance.
Make sure the countertop/vanity surface is clean and dry.
Temporarily position the lavatory on countertop/vanity cut-out. Lightly mark outline.
NOTE: If installing the lavatory with hole drilling, install the faucet at this time. Follow all the instructions
packed with the faucet.
Remove the lavatory and apply a continuous bead of sealant (not provided) around the bottom
edges of the lavatory.
Place the lavatory on top of the countertop/vanity cut-out and immediately wipe away any excess
sealant.
Allow the sealant to cure before proceeding.

6. Complete the Installation

Install bracket covers according to installation instructions packed with bracket kit.
Install lavatory drain. Follow all instructions packed with the drain.
Connect supplies and drain assembly.
Turn supplies on and check for leaks.
1012579-2-B
Wall-Mount Vanity
6
Lavastone
Countertop
Kohler Co.