Service And Warranty - Bosch Dremel MOTO-SAW Manual De Instrucciones

Excessive pressure on the work piece will result in early
blade snapping.
14. Before beginning work on your project, make a few practice
cuts on scrap material.
HAND-HELD MODE
1. Keep pressing the Quick Release Button while detaching the
Moto-Saw unit from its base. PICTURE 13
2. Once the tool is detached, the Moto-Saw can be held in your
hand. PICTURE 14
3. While cutting in hand-held mode, make sure you have a firm
grip on the tool. PICTURE 14
4. Try to line up the unit's surface against the bottom of your
work piece to reduce vibration. PICTURE 15
USEFUL HINTS AND TIPS
For useful hints and frequently asked questions, please visit
www.dremel.com.
MAINTENANCE
Preventive maintenance performed by unauthorized personnel
may result in misplacing of internal wiring and components which
could cause serious hazard. We recommend that all tool service
be performed by a Dremel Service Facility. To avoid injury from
unexpected starting or electrical shock, always remove plug from
wall outlet before performing service or cleaning.
CLEANING
TO AVOID ACCIDENTS, ALWAYS
WARNING
!
DISCONNECT THE TOOL AND/OR
CHARGER FROM THE POWER SUPPLY BEFORE CLEANING. The
tool can be cleaned most effectively with compressed dry air. Always
wear safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and
free of foreign matter. Do not attempt to clean the tool by inserting
pointed objects through an opening.
CERTAIN CLEANING AGENTS AND
WARNING
!
SOLVENTS DAMAGE PLASTIC PARTS.
Some of these are: gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household detergents that contain
ammonia.

SERVICE AND WARRANTY

NO USER SERVICEABLE PARTS INSIDE.
WARNING
!
Preventive maintenance performed by
unauthorized personnel may result in incorrect connection of internal
wiring and components which could cause serious hazard. We
recommend that all tool service be performed by a Dremel Service
Centre. SERVICEMEN: Disconnect the tool and/or charger from the
power source before servicing.
DV-2610Z04872, Page: MUL (VAB), downloaded at: 2014.06.23_21:31:54, by PT-RT/MKP1_Carla.Ramalho
This DREMEL product is guaranteed in accordance with statutory/
country-specific regulations; damage due to normal wear and tear,
overload or improper handling are excluded from the warranty.
In case of a complaint, send the undismantled tool or charger and
proof of purchase to your dealer.
CONTACT DREMEL
For more information on the Dremel product range, support and
hotline, go to www.dremel.com.
SAC Bosch Brasil: Grande São Paulo: (11) 2126 1950
Demais Localidades: 0800 70 45446
Robert Bosch Argentina Ind. SA 0800-4444-26724
19