Used Symbols; General Power Tool Safety Warnings - Bosch Dremel MOTO-SAW Manual De Instrucciones

Si desea presentar una queja, envíe la herramienta desmontada
junto con un justificante de compra al distribuidor que se la haya
vendido.
DATOS DE CONTACTO DE DREMEL
Para obtener más información sobre la gama de productos
Dremel, el soporte técnico o la línea de atención al cliente de
Dremel, visite www.dremel.com.
SAC Bosch Brasil: Grande São Paulo: (11) 2126 1950
Demais Localidades: 0800 70 45446
Robert Bosch Argentina Ind. SA 0800-4444-26724
ORIGINAL INSTRUCTIONS
ENG

USED SYMBOLS

READ THESE INSTRUCTIONS
USE EYE PROTECTION
USE HEARING PROTECTION
DOUBLE INSULATION (NO EARTH WIRE
REQUIRED)
DO NOT DISPOSE OF ELECTRIC TOOLS,
ACCESSORIES AND PACKAGING TOGETHER
WITH HOUSEHOLD WASTE MATERIAL
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
!
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
f. Keep work area clean and well lit. Cluttered and dark areas
invite accidents.
g. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
h. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
a. Power tool plug must match the outlet. Never modify
b. Avoid body contact with earthed or grounded surfaces
c. Do not expose power tools to rain or wet conditions.
d. Do not abuse the cord. Never use the cord for carrying,
e. When operating a power tool outdoors, use an extension
f.
a. Stay alert, watch what you are doing and use common
b. Use personal protective equipment. Always wear eye
c. Prevent unintentional starting. Ensure the switch is in
d. Remove any adjusting key or wrench before turning the
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS.
e. Do not overreach. Keep proper footing and balance at
f.
g. If devices are provided for the connection of dust
a. Do not force the power tool. Use the correct power tool
b. Do not use the power tool if the switch does not turn it
16
DV-2610Z04872, Page: MUL (VAB), downloaded at: 2014.06.23_21:31:54, by PT-RT/MKP1_Carla.Ramalho
ELECTRICAL SAFETY
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
Water entering a power tool will increase the risk of electric
shock.
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use an earth leakage circuit breaker (ELCB)
protected supply. Use of an earth leakage circuit breaker
reduces the risk of electric shock.
PERSONAL SAFETY
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust related hazards.
POWER TOOL USE AND CARE
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.