Manual Setting - Hama RC 650 Instrucciones De Uso

Display
Display ashing
Displayed continuously
Not displayed

5.2 Manual setting

Manually setting the date/time/calendar
• Press and hold the Down (10) button for approx. 3 seconds to stop the search for
the DCF signal. The radio icon (2) goes out and you can set the time manually.
• Press and hold the SET button (9) for approx. 3 seconds to start manually setting
the date/time.
• Set the following information in the order listed:
• To select the individual values, press the UP (8) button or the Down (10) button
and con rm each selection by pressing the SET button (9).
• After setting the date, you will be able to select the language in which the weekday
will be displayed. You can choose between the following languages:
GER for German, ENG for English, FRA for French, ITA for Italian, NET for Dutch, ESP
for Spanish, DAN for Danish
Note – Summer time
The clock automatically switches to summer time. S appears on the display as long
as summer time is activated.
Note – Time zone
• The time zone is used if the DCF time signal is received in a country whose time
zone does not correspond to German time.
• If the time shift is +1 hour, for example, you need to set the time zone to +1. This
will automatically set the clock forward one hour.
4
Searching for the DCF signal
Active
Successful – signal is being received
Deactivated