Settings Wizard; Transfer Content - Nokia 6790 Guia Del Usuario

To access the Phone Setup application later, select
Applications > Help > Phone setup.
To set up the device connections, select Settings wizard.
To transfer data to your device from a compatible Nokia
device, select Phone switch.
The available options may vary.

Settings wizard

Select > Tools > Settings wizard.
Use Settings wizard to define e-mail and connection settings.
The availability of the items in Settings wizard depends on
the features of the device, SIM card, service provider, and the
data in the Settings wizard database.
To start Settings wizard, select Start.
To get the best results when using the settings wizard, keep
your SIM card inserted in the device. If the SIM card is not
inserted, follow the instructions on the display.
Select from the following:
● Operator — Define the operator-specific settings, such as
MMS, Internet, WAP, and streaming settings.
● E-mail setup — Configure a POP, IMAP, or Mail for
Exchange account.
The settings available for editing may vary.

Transfer content

The type of content that can be transferred depends on the
model of the device from which you want to transfer content.
If that device supports synchronization, you can also
18
synchronize data between the devices. Your Nokia 6790
>
slide notifies you if the other device is not compatible.
If the other device cannot be switched on without a SIM card,
you can insert your SIM card in it. When your Nokia 6790
slide is switched on without a SIM card, the offline profile is
automatically activated, and transfer can be done.
Transfer content for the first time
1. To retrieve data from the other device for the first time,
on your Nokia 6790 slide , select Switch in the Phone
Setup application, or select
2. Select the connection type you want to use to transfer the
data. Both devices must support the selected connection
type.
3. If you select Bluetooth, connect the two devices. To have
your device search for devices with Bluetooth
connectivity, select Continue. Select the device from
which you want to transfer content. You are asked to
enter a code on your Nokia 6790 slide . Enter a code (1-16
digits), and select OK. Enter the same code on the other
device, and select OK. The devices are now paired.
Some earlier Nokia devices may not have the Switch
application. In this case, the Switch application is sent to
the other device as a message. To install Switch on the
other device, open the message, and follow the
instructions.
4. From your Nokia 6790 slide , select the content you want
to transfer from the other device.
When the transfer has started, you can cancel it and
continue later.
> Tools > Switch.
© 2004 Nokia. All rights reserved.