Best WPP9 Manual De Usario página 14

NON-DUCTED INSTALLATION AVAILABLE
ONLY FOR SINGLE BLOWER VERSION
(WPP9IQ only)
Note:
a. Purchase Model ANKWPP9 Non-ducted
Recirculation Kit from your local dealer.
b. Rooms with 10 or 11 foot ceilings require
Flue Extension Model AEWPP9SBN,
available from your local dealer. Discard
the upper flue supplied with the range
hood and replace it with the longer flue
extension.
1. Attach the 6"-to-8" adapter to blower
discharge and tape joint with aluminum
duct tape (Fig.16).
2. Install the plenum to the upper decorative
flue using (4) 3.9 x 6mm flat head screws
provided as shown (Fig.17).
3. Attach 6" expandable ducting to the
plenum using the adapter and tape joints
with aluminum duct tape (Fig.18).
4. Slide upper flue into lower flue.
5. Attach flue assembly to hood.
6. Attach flex duct to plenum through the duct
connector (Fig.18).
7. Attach upper flue to flue bracket using (2)
3.9 x 6mm flat head screws.
DUCT
CONNECTOR
- 14 -
FIG. 16
MOUNTING SCREWS
(3,9x6mm Flat Head)
FIG. 17
FIG. 18