Kichler 82326 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Bring glass (L) over socket (E) and secure glass
(L) to bottom ring (N) with threaded knob (M).
2. Screw threaded pipe (G) into coupling (F) and
threaded loop (J) into threaded pipe (G).
Note: The electrical cable will need to get pulled
through the individual parts as they are installed
on this and later steps.
3. Position threaded nipple (C) in mounting bracket
(B) so that, when mounted:
• The threaded nipple (C) will protrude a
minimum of 1/4 inch beyond the raised center
portion of the bracket (B).
• The threaded nipple (C) height should be
positioned so that 1/2 the exterior threads of
the screw collar loop (I) will extend past the
canopy (A), when it is mounted.
Note: Canopy is only needed to
determine the position of the threaded nipple
and fixture loop. It will be installed later.
1
N
L
2
3
B
A
A
4
E
J
G
F
1/4
Inch
C
I I
M