Kichler 82326 Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
4. Once the proper position of the threaded nipple
(C) and mounting bracket (B) has been
determined, secure with hex nuts (D) as follows:
• Screw one hex nut (D) onto the threaded
nipple (C) and tighten against the raised
portion of the mounting bracket (B).
• Screw another hex nut (D) onto the threaded
nipple (C) and tighten against the flat portion
of the mounting bracket (B).
• Screw the remaining hex nut (D) onto
threaded nipple (C) and tighten against the
screw collar loop (I).
5. Connect mounting bracket (B) to the outlet box
(not included) with short machine screws (BB).
Hardware Used
Short Machine
BB
Screw
6. To open chain links:
Locate the split in the chain link (K) you're
removing. Put one pair of pliers (not included) on
each side of the split and rotate the pliers in
opposite directions to open the link's split. The open
link should be shaped like the letter "C".
Do not twist the ends of the link sideways so that
the open link cannot lay flat.
4
B
5
x 2
BB
6a
6b
INCORRECT
5
1/4
C
D
I
Outlet Box
CORRECT
K
K
Inch
B