Parts & Assembly - Nostalgia Products Coca-Cola Serie Instrucciones Y Recetas

PARTS & ASSEMBLY
Your COCA-COLA® SNOW CONE MAKER comes fully assembled.
• Before first use, lift the Top Housing off of the Main Unit and remove the Ice Shaving Canister.
• The Ice Shaving Canister can be removed by taking off the Ice Shaving
Canister Lid and lifting Ice Shaving Canister from Top Housing.
• Wipe clean the inside of the Main Unit and Ice Shaving Canister with a non-abrasive moist
sponge, a non-abrasive towel, or a damp cloth followed by a non-abrasive dry towel.
• After cleaning the inside, reassemble the Ice Shaving Canister
and Main Unit, and put the top back on the Main Unit.
• Use EXTREME caution when cleaning and handling the Ice Shaving Canister, as the
blades are VERY sharp.
• Now you are ready to enjoy cool, refreshing icy snacks
from your COCA-COLA® SNOW CONE MAKER!
PARTS
Door
Ice Shaving Canister
Ice Feed Insert
Locking Cap
ASSEMBLY
5
Ice Shaving
Canister Lid
Locking Cap
Ice Feed Insert
Ice Shaving Canister
Top Housing
Main Unit
Cone Shelf
2 Plastic Cones
Ice Scoop
Ice Shaving
Canister Lid
When assembling Ice Shaving
Canister parts, turn Locking
Cap clockwise to lock and turn
counter-clockwise to unlock.