Kenmore W10300914A Instrucciones De Instalación página 17

5. If using a countertop attachment to secure dishwasher, check
that top of door does not contact screws, brackets, or
countertop. If it does, dishwasher must be lowered and re-
leveled.
6. If securing with a side attachment, check that sides of door do
not rub against the screw heads. If they do, dishwasher must be
re-centered.
7. Remove towel from dishwasher.
8. Reinstall the lower dish rack.
Complete installation
1. Check that grounding clip is attached to the lower panel.
2. Place the lower panel behind the access panel. Some models
have insulation on the access panel which must fall behind the
insulation on the lower panel.
Access panel
Lower
panel
3. Hold the two panels together and place them against
dishwasher leg.
4. Reinstall the screws through the holes in the access panel and
the slots in the lower panel. Install right side screw first.
5. Check that the lower edge of the lower panel contacts the
floor.
6. Tighten the screws.
Direct wire method:
Power supply cord method:
Grounding
clip
7. Reconnect power or plug in dishwasher.
17