Kenmore W10300914A Instrucciones De Instalación página 18

Check operation
1. Read the Use and Care Guide that came with your dishwasher.
2. Check that all parts have been installed and no steps were
skipped.
3. Check that you have all the tools you used.
4. Start dishwasher and allow it to complete the shortest wash
cycle. After the first 2 minutes, unlatch door, wait 5 seconds,
then open door.
5. Check to see that there is water in the bottom of the dishwasher
tub. Check that dishwasher is working properly.
6. If the dishwasher is not working properly, disconnect power or
unplug dishwasher and see "If dishwasher does not operate"
section.
18
If dishwasher does not operate
First try the solutions suggested here to possibly avoid the cost of a
service call.
Has the circuit breaker tripped or the house fuse blown?
Is the door closed tightly and latched?
Has the cycle been set correctly to start the dishwasher?
Is the water turned on?
If none of these work, call 1-800-4-MY-HOME.