UFESA BP4530 Manual De Instrucciones página 15

Overview
Detachable foot
Blending-mincing blade
Motor housing
Switch
Eject buttons for the foot
Mixing jug
Safety devices start lock-out
If motor stops during operation, unplug
the appliance and cool it down
for 5 minutes.
Overload protection switches on.
Possible causes:
• The food has jammed the blender blade
• Too much pressure exerted on the food during the cutting
process. Eliminate the cause and switch on the appliance
again after cooling period
Operation
The blender is suitable for preparing mayonnaises, purées,
compotes, shakes, jams, baby foods or to mince small
quantities of walnuts or almonds. It must not be used
to prepare mashed potato.
To attach the foot, insert the top part of the foot into the hole
on the bottom of the motor housing until you hear a "click".
To remove it, press the lower buttons inwards and the foot will
come away automatically.
Plug it in to mains. Press the switch to begin work. In order
to avoid splashes insert the foot into the ingredients before
switching the blender on. Move the mixing foot about in the
mixture to get an even blend.
Universal mincing accessory
(Depending on the model)
Safety instructions for this appliance
Risk of injury from sharp
blades/rotating drive
Never grip the blade in the universal cutter. Take hold of the
universal cutter blade by the plastic handle only. Never clean
the blades with bare hands. Use a brush.