Cleaning And Maintenance - UFESA BP4530 Manual De Instrucciones

Whisk with gear attachment
(Depending on the model)
Caution!
Never insert the whisk into the base unit without the gear
attachment.
• Place the gear attachment on the base unit and lock into position.
• Insert the whisk into the gear attachment and lock into position.
• Insert the mains plug.
• Put ingredients into the mixing jug.
• Take hold of the base unit and mixing jug and press the switch.
For whipping cream, beating egg whites and milk shakes
(cold milk, max. 8°C).

Cleaning and maintenance

Always unplug the appliance before cleaning it.
Motor housing
The motor housing and the adapter for the accessories should
only be wiped down with a damp cloth. Do not immerse them
in water or any other liquid.
Mixing foot
Do not immerse the foot in water as this will ruin the lubrication
on the bearings. Clean the blender foot in the dishwasher or with
a brush under running water.
Dry the blender foot in an upright position (blender blade face
up) so that any trapped water can run out. Remove the whisk
from the gear attachment.
Whisk accessory
(Depending on the model)
The whisk can be cleaned in the dishwasher, but wipe the gear
attachment with a damp cloth only.
Mincing accessory
(Depending on the model)
The jug and the blade can be washed with water and non-
abrasive detergents. Do not immerse the top part in water.
Clean it down with a damp cloth only.