Cleaner Assembly; Carton Contents - Hoover Cyclonic Upright El Manual Del Propietario

If you need any assistance:
Visit our website at hoover.com. Click on the "Service" button to find the service outlet
nearest you OR
Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR
Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.
Please do not return this product to the store

1. Cleaner assembly

Carton contents

1-1
A
B
Attach upper housing
1-2
A
Remove dirt cup (A) from upper
housing (B) by pressing dirt cup
release button (C) and pivoting cup
out. Set dirt cup aside.
1-5
Using a Phillips screwdriver, fasten
(3) screws located at the bottom of
the upper housing.
C
1-3
B
C
Using a Phillips screwdriver, remove
(3) screws from cleaner base. DO
NOT DISPOSE OF SCREWS.
Remove cardboard and discard.
1-6
Place bottom of dirt cup into cleaner
body first. Pivot cup into cleaner
body.
.
A. Handle section
B. Cleaner base assembly
C. Cleaner upper housing assembly
D. Cleaning tools and wands
E. Hose
D
Remove all parts from carton and
E
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
1-4
Align upper housing (D) over cleaner
base (E) and slide down until upper
housing sits securely over base.
1-7
Press on dirt cup release button
while firmly pressing on dirt cup.
Release button in order for it to
return to proper position and lock
the dirt cup into place.
Continued
3