Cleaner Assembly; Assembling Cleaner; Carton Contents - Hoover WindTunnel Manual Del Propietário

If you need any assistance:
Visit our website at www.hoover.com. Click on the "Service" button
to find the service outlet nearest you OR
Call 1-800-944-9200 for an automated referral of authorized service
outlet locations (U.S. only) OR
Call 1-330-499-9499 to speak with a representative in our Consumer
Response Center.
Please do not return this product to the store

1. Cleaner assembly

Carton contents

1-1
A
B
Remove all parts from carton and
identify each item shown. Make sure
all parts are located before disposing
of packing materials.
A. Handle section
B. Cleaner body
C. Hose rack
D. Hose, cleaning tools and wands
E. Handle bolts and nuts packet
(in bag with owner's manual)
STEP 1 Attach rack and handle
1-2
Open tool cover on handle section
(A).
Not
D
C
1-3
B
C
A
Attach hose rack to handle section
by fitting hooks (B) on rack over
slots (C) on handle section.
.
E
Note: The white switch lock above the ON/OFF switch aids
in the assembly of your cleaner. Assembly can be continued
if the switch lock is missing. However, do not remove the
switch lock until assembly is completed.
1-4
Align hole on rack with circular tab
on handle.
Continued
3