Operation; Select A Drum Kit; Set Pad Voice; Set Pad Volume - Oqan QPD-7 ADVANCED DRUM Manual De Instrucciones

Operation

Select a Drum Kit

Kit menu is the default menu after power on, default
value is 001.
Press [kit] button to enter kit menu. The 3-digit
LED will show the current kit number with the
corresponding menu indicator lit up. The button
select [+] / [ ] or [dial] can be used to select any kit
(1-30, loop) as current kit.

Set Pad Voice

Press [ pad assign ] button to enter pad assign
menu.
Default value will be the voice value of crash pad
based on different kit selected. For example, if kit
001 has been selected, then press pad assign, the
value on LED will be 96, as this is the voice value
on crash pad.
If pad assign menu is selected the corresponding
menu indicator will be lit up.
In this menu, the 3-digit LED will show the voice
numberof current pad, which can be selected by
pressing pad button on the top panel or by pad
hitting. The button select [+] / [ ] or [dual] can be
used to select any voice (1-215, loop) for current
pad.

Set pad volume

Press [ volume ] button to enter pad assign menu.
If pad assign menu is selected,the corresponding
menu indicator will be lit up.
In this menu, the 3-digit LED will show the volume of
current pad, which can be selected by pressing pad
button on the top panel or by pad hitting. The button
select [+] / [ ] or [dial] can be used to select the
volume (0-9, loop) for current pad.
6