Care & Maintenance - fortress Pure View Instrucciones De Instalación

CARE & MAINTENANCE
Care And Maintenance Of Fortress Railing Products
Powder-Coated Products And Surfaces:
• Immediately after installation of your Fortress Railing Products,
clean powder-coated products and surfaces with a solution of
warm water and non-abrasive, pH neutral detergent solution�
Surfaces should be thoroughly rinsed after cleaning to remove
all residues� All surfaces should be cleaned using a soft cloth or
sponge�
• Ensure construction materials such as concrete, plaster, and paint
splashes are removed immediately before they have a chance to
dry� Failure to remove these materials may cause damage to the
powder-coated surfaces�
• The frequency of cleaning depends in part on the standard
of appearance and also the requirements to remove deposits
that may cause damage to the powder coating after
prolonged exposure� Fortress recommends cleaning in three to
four monthly intervals all products and powder-coated surfaces�
In areas where higher traffic, increased atmospheric substances,
or other effects may occur, the time period between cleanings
should be increased to monthly intervals�
• WARNING: Do not use strong solvents such as
thinners, or solutions containing chlorinated
hydrocarbons, esters, or ketones. Abrasive cleaners or
cutting compounds should not be used.
PURE VIEW: Al FULL GLASS PANEL INSTALLATION
13
23