Post Mounting - fortress Pure View Instrucciones De Instalación

POST MOUNTING

*If using Fortress Evolution Framing, contact Fortress for instructions�
Note:
It's recommended to install brackets into post before
post mounting. Reference page 8 for Bracket
Installation steps.
Step 1: Install Wood Blocks
1� Install Wood Block level with top of joist� As shown in Fig�1(A)
2� Secure Wood Block to blocking on all four sides with #10 X
3-1/2" [89mm] deck screws�
• Wood Block must be constructed with treated dimensional
lumber with a minimum thickness of 1-1/2" [38mm]�
Joist
Fig. 1
Blocking
(A)
Step 2: Position Base Plate
1� Position the edge of AL
from the inside edge of rim joist� As shown in Fig� 1�
Fig. 1
1/2"
[12�5mm]
6
base plate a minimum of ½" [12�5mm]
13
1/2" [12�5mm]
PURE VIEW: Al FULL GLASS PANEL INSTALLATION
13
(A)
#10 x 3-1/3"
[84�5mm]