Publicidad
Step 6
Step
Fasten the SMALL TOP (F) to the FRONT PANEL (L). Tighten two HIDDEN CAMS.
å
NOTE: Choose which color you want for the tray.
å
If you chose the WHITE TRAY, push two CAM COVERS (19P) onto the HIDDEN CAMS in the SMALL TOP (F).
å
Insert three METAL PINS (1R) into the holes in the RIGHT END (A).
å
Fasten the FRONT PANEL (L) to the RIGHT END (A). Tighten the HIDDEN CAM.
å
NOTE: You may need to use the SHORT SCREWDRIVER to tighten the HIDDEN CAM.
å
NOTE: Be sure the METAL PINS in the RIGHT END insert into the SMALL TOP (F) and FRONT PANEL (L).
å
NOTE: The surfaces of the SMALL TOP (F) and SMALL TOP BACK (J) that are facing each other should match in color.
å
Surface without
HIDDEN CAMS
t r a y
w n
B r o
Finished edge
A
J
These surfaces
should match.
Page 10
F
L
Surface with
HIDDEN CAMS
L
F
Maximum
210 degrees
Minimum
190 degrees
416861
F
t r a y
L
i t e
W h
19P
Finished edge
Arrow
www.sauder.com/services
Publicidad
