Philips sonicare 7300 Manual De Usuario página 33

4 Remove the end cap from the toothbrush handle. If the end
cap does not release easily from the housing, repeat step 3
until the end cap is released.
5 Holding the handle upside down, press the shaft down on a
hard surface. If the internal components do not easily release
from the housing, repeat step 3 until the internal components
are released.
6 Wedge the screwdriver between the battery and the black
frame at the bottom of the internal components. Then pry
the screwdriver away from the battery to break the bottom
of the black frame.
35_021_7418_2_Booklet_A6_v2.indd 33
English 33
16/05/2019 10:08