Setting The Clock; Cd Player Cd/Md Unit (Optional); Playing A Disc - Sony CDX-MP70 Manual De Instrucciones

Setting the clock

The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (MENU), then rotate the
./> control dial until "Clock"
appears.
1 Press the ./> control dial.
The hour indication flashes.
2 Rotate the ./> control dial to
set the hour.
3 Press the M+ button.
The minute indication flashes.
4 Rotate the ./> control dial to
set the minute.
2
Press the ./> control dial.
The clock starts. After the clock setting is
completed, the display returns to normal play
mode.
Tip
When D.Info mode is set to on, the time is always
displayed (page 21).
./> control
dial
CD Player
CD/MD Unit (optional)
In addition to playing a CD with this unit, you
can also control external CD/MD units.
Note
If you connect an optional CD unit with the CD TEXT
function, the CD TEXT information will appear in the
display when you play a CD TEXT disc.

Playing a disc

(With this unit)
1
Press Z.
The disc compartment slides out.
2
Place a disc on the disc tray with the
label side up.
Insert the disc until it clicks.
3
Press N.
The disc compartment closes and playback
starts.
If a disc is already inserted, press (SOURCE)
repeatedly until "CD" appears in the display, and
playback starts. (If you press (OPEN/CLOSE),
the disc compartment closes but playback does
not start.)
Notes
• Do not place more than 1 disc on the disc tray.
• The disc compartment closes automatically after 30
seconds.
continue to next page t
11