Accessories; Recommended Cutting Equipment; Kickback And Guide Bar Nose Radius - Husqvarna 455 Rancher Manual Del Usuario

Cylinder displacement,
3
cu.in/cm
Idle speed, rpm
Maximum engine power
acc. to ISO 8893, kW/hp @
rpm
1
Ignition system
Spark plug
Electrode gap, in/mm
Fuel and lubrication system
Fuel tank capacity, US
Pint/liter
Oil tank capacity, US Pint/
liter
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/
number of teeth
Saw chain speed at 133%
of maximum engine power
speed, ft/s / m/s.

Recommended cutting equipment

A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Husqvarna 455 Rancher, 455e
Rancher, 460 Rancher met the safety requirements in
ANSI B175.1-2012 and Canadian Standards Association
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback), when equipped with the below
listed saw chain and guide bar combination(s).
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
36
Husqvarna 455 Rancher
3.38/55.5
2700
2.6/3.5 @ 9000
NGK BPMR 7A/ Champion
RCJ 7Y
0.020/0.5
0.93/0.44
0.68/0.32
Automatic
13.0/5.9
Spur/7
66/20

Accessories

Husqvarna 455e Rancher
3.38/55.5
2700
2.6/3.5 @ 9000
NGK BPMR 7A/ Champion
RCJ 7Y
0.020/0.5
0.93/0.44
0.68/0.32
Automatic
13.2/6.0
Spur/7
66/20
Note: Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
We recommend only to use the listed guide bar and saw
chain combinations.

Kickback and guide bar nose radius

For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
Husqvarna 460 Rancher
3.68/60.3
2700
2.7/3.7 @ 9000
NGK BPMR 7A/ Champion
RCJ 7Y
0.020/0.5
0.93/0.44
0.68/0.32
Automatic
13.2/6.0
Spur/7
66/20
589 - 004 - 03.07.2019