To Use The Product In Cold Weather; Maintenance; Maintenance Schedule - Husqvarna 455 Rancher Manual Del Usuario

7. Continue to cut more into the tree until the tree/
branch bends and the tension is released.
8. Cut the tree/branch from the opposite side of the
bend, after the tension is released.

To use the product in cold weather

CAUTION: Snow and cold weather can
cause operation problems. Risk of too low
engine temperature or ice on the air filter
and the carburetor.
1. If the temperature is 0˚C/32˚F or colder, carefully
remove the plug in the cylinder cover.
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.

Maintenance schedule

Daily maintenance
Clean the external parts of the prod-
uct and make sure that there is no oil
on the handles.
589 - 004 - 03.07.2019
2. If the temperature is -5˚C/23˚F or colder, assemble

Maintenance

Weekly maintenance
Clean the cooling system. Refer to
To clean the cooling system on page
33 .
the winter cover on the starter housing.
CAUTION: Remove the winter cover if the
temperature increases above -5°C/23°F.
Assemble the plug in the cylinder cover if
the temperature increases above 0°C/32°F.
Risk of too high engine temperature and
damage to the engine.
Monthly maintenance
Do a check of the brake band. Refer
To do a check of the brake band
to
on page 23 .
21