Andis RBC Manual De Uso Y Cuidado página 5

OPERATING INSTRUCTIONS
USING YOUR ANDIS CLIPPER
1. The start switch has a locking feature to prevent the clipper from being accidentally turned "ON" or
"OFF." To turn the clipper "ON," press the small red button on the start switch and slide switch forward.
The switch is textured for a sure grip even with sweaty or oily hands. To turn the clipper "OFF," press the
small red button and slide the switch back (Diagram I).
2. When switched on, the glowing blue lens on the clipper housing indicates the battery pack has a strong
charge. The blue light turns off when several minutes of power remain. This is simply a caution that the
battery may not have enough remaining charge to finish a large clipping job and may need to be
recharged.
3. If extended clipping continues, the battery pack will shut itself off to prevent the internal lithium-ion
cell from discharging completely. This protects the lithium-ion cell and is entirely normal – not a
malfunction. The battery pack will resume normal operation when recharged.
4. For greater convenience when continuous clipping is desired, consider purchasing an additional battery
pack. Exchange a fully charged battery pack with one in the low battery condition for extended operation.
5. When not in use, rest your clipper – with or without the lithium-ion battery pack attached – in the storage
pocket of the charger. This reduces the chances your clipper will be knocked to the floor and damaged
(Diagram J).
ADjUSTING THE BLADE SET
The Andis Clipper Model RBC features an adjustable blade set. Lines on the clipper indicate the five cutting
positions. For the shortest cut, use your thumb to align the lever with the shortest line on the clipper
housing. The lever will click into place. To cut the least amount of hair, align the lever with the longest line
on the clipper housing (Diagram K).
SWITCH LOCK
BATTERY
INDICATOR
LIGHT
Diagram I
Diagram L
Diagram J
LINE UP
SLOT
PIN
Diagram M
ADJUSTMENT
LEVER
CUTTING
HEIGHTS
Diagram K
5