Cleaning And Maintenance; Cleaning; General Maintenance; Replacing The Spool - Deltafox DG - CGT 2023 Traducción Del Manual De Instrucciones Origina

Setup for edge trimming:
To trim lawn edges, slowly move
the appliance along the lawn edg-
es.
• Handle rod: 90° (see
• Cutting angle: 90° (see
• Spacer bow in parking position

Cleaning and maintenance

Warning! Risk of injury from
moving dangerous parts!
Contact our Service Centre about
repairs and servicing not de-
scribed in this manual. Only use
OEM parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance with
water and do not immerse it in
water. Electric shock hazard!
• Keep clean the ventilation slots, mo-
tor housing and handles of the appli-
ance. Use a damp cloth or a brush.
Do not use cleaning agents or sol-
vents. You may otherwise irreparably
damage the appliance.
• After every trimming session, remove
grass and soil from the protective
cover and the trimming assembly.
• To thoroughly

General maintenance

• Prior to every use, check the appli-
ance for obvious defects such as
„
) loose, worn or damaged parts.
ƒ
) • Check covers and safety devices for
damages and correct installation. Re-
place as necessary.

Replacing the spool

1. Attach the spool (14) receptor
2. Open the spool cover (14) and
3. Insert a new spool and close
Storage
• Store the trimmer in a dry place well
out of reach of children.
• Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the pro-
tective cover does not come into con-
tact with other objects. This is because
the protective cover could become
deformed, thereby changing its dimen-
sions and its safety properties.
Disposal and protection of
the environment
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
with one hand. Press the spool
cover (14) down slightly and
turn it in the direction of the ar-
row.
remove the empty spool.
the cover.
Machines do not belong with do-
mestic waste.
GB
33