BEBE CONFORT Titan Pro Manual Del Usuario página 29

EN
• Warning: when installing the car seat, spaces between the base of the car seat and the vehicle
seat are possible depending on the position of the anchorage points within the vehicle.
• The rigid parts and the plastic sections of a child restraint device should be positioned and in-
stalled in such a way that they cannot, when the vehicle is being used under normal conditions,
become trapped under a moving seat or in the vehicle door.
• Never modify the construction or the materials of the car seat and the seat belt without
consulting the manufacturer.
• This child restraint is effective only if the instructions for use are respected.
• Always fasten the child restraint even when the child is not sitting in it.
• Never place heavy objects on the rear parcel shelf, to avoid the danger of projectiles in the
event of an accident.
• Always check that no part of the seat or the harness is trapped under a seat or in the vehicle door.
• If in any doubt about the correct installation or use of the system, the user is advised to contact
the distributor or the manufacturer of the child restraining device system.
CARE
Inlay:
• The inlay included in your Titan Pro seat plays an integral part in the efficiency of the restraint
system for your child from 9 to 13 kg. It can be removed and the cover taken off for washing,
but it is essential to place it back again where it belongs and only use this official Bébé Confort
Titan Pro inlay. This inlay is exclusively for use with the Titan Pro seat.
Fabric:
• The cover, the shoulder pads and the crotch pad can be removed for washing. If the cover
needs to be replaced at any time, only use official Bébé Confort cover because it constitutes an
integral part of the restraint performance.
• Before cleaning check the label sewn into the various parts of the fabric, you will find the wash-
ing symbols indicating the method of washing each item.
56
• Keep the car seat clean. Do not use lubricants or aggressive cleaning agents.
Shell:
• Clean the shell using a damp cloth.
ENVIRONMENT
Keep plastic covering away from children to avoid suffocation. For environmental reasons, when
you have stopped using this product, we ask that you dispose of the product in the proper waste
facilities in accordance with local legislation.
QUESTIONS
Please contact your local Bébé Confort distributor or on our website, www.bebeconfort.com in
the part "Our services". When doing so please have the following information at hand:
- Serial number;
- Make and type of car and seat on which the Titan Pro is used;
- Age, height and weight of your child.
WARRANTY
Our 24 months warranty refl ects our confi dence in the high quality of our design, engineering,
production and product performance. We confi rm that this product was manufactured in accord-
ance with the current European safety requirements and quality standards which are applicable
to this product, and that this product is free from defects on materials and workmanship at
the time of purchase. Under the conditions mentioned herein, this warranty may be invoked by
consumers in the countries where this product has been sold by a subsidiary of the Dorel Group or
by an authorized dealer or retailer.
EN
57