Safety Instructions - Hammerhead HLCL02 Manual De Instrucciones

SAFETY INSTRUCTIONS

Safety Instructions for Compact Self-Leveling Cross Line Laser
WARNING
LASER RADIATION. Do not stare into beam. Class
II laser product. Turn the laser beam on only when
using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure. The laser beam
can cause flash blindness.
• Do not operate the tool around children or allow
children to operate the tool.
• Do not place the tool in a position that may
cause anyone to stare at the laser beam,
whether intentionally or unintentionally.
• Do not use on surfaces, such as sheet steel, that have shiny, reflective
surfaces. The shiny surface could reflect the beam back at the operator.
• Always turn the laser tool off when not in use. Leaving the tool on
increases the risk of someone inadvertently staring into the laser beam.
• Do not attempt to modify the performance of this laser device in any way.
This may result in a dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the compact self-leveling cross line laser. If
unqualified persons attempt to repair this product, serious injury may occur. Any repair
required on this laser product should be performed only by qualified service personnel.
• Use of other accessories that have been designed for use, with other laser
tools could result in serious injury.
• Do not operate the tool outdoors.
• Do not place or store tool under extreme temperature conditions.
COMPACT SELF-LEVELING CROSS LINE LASER WITH TRIPOD STAND
CAUTION
PRECAUCIÓN
LASER RADIATION - DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE
DIRECTAMENTE EL RAYO
635nm, Output < 1mW, Class II laser product
Complies with 21 CFR parts 1040.10 and 1040.11
Producto láser clase II con salida < 1mW, 635 nm,
que cumple con las secciones 21 CFR 1040.10 y
1040.11
AVOID EXPOSURE- EVITE LA EXPOSICIÓN-
Laser radiation is emitted from this aperture
La radiación láser se emite de esta abertura
Compact Self-Leveling Cross Line Laser with Tripod Stand
Láser compacto autonivelante de líneas cruzadas con trípode
3