Hammerhead HLCL02 Manual De Instrucciones página 9

OPERATION
3. SELF-LEVELING MODE
Your compact self-leveling cross
line laser has two working modes:
self-leveling mode and lock mode. In
self-leveling mode, the tool will level
itself if it is within ±4° of horizontal.
a. Place the compact self-
leveling cross line laser on
a flat, smooth surface that
is within ±4° of horizontal.
Unfold the folding legs so that
they hold the tool steady.
b. To choose the self-leveling mode, rotate the leveling mode ring until the
indicator aligns with the "
c. Turn the tool on by depressing the power switch. The compact self-leveling
cross line laser will automatically level within 5 seconds. The tool will
project a cross-hair pattern laser line (both horizontal and vertical lines).
d. If the surface on which the compact self-leveling cross line laser is placed
exceeds ±4° from horizontal, the laser line will shut off as an alarm and
the power switch will illuminate in red. In this event, adjust the angle of the
surface slightly.
e. To turn off the laser lines, depress the switch.
COMPACT SELF-LEVELING CROSS LINE LASER WITH TRIPOD STAND
3
INDICATOR
" mark.
LOCKED
OPEN
9