Maintenance - Hammerhead HLCL02 Manual De Instrucciones

MAINTENANCE

This compact self-leveling cross line laser has been designed to be a low-
maintenance tool.
However, in order to maintain its performance, you must always follow these
simple directions:
a. Avoid exposing the tool to shock, continuous vibration or extreme hot or
cold temperature.
b. Always store the tool indoors.
c. Always keep the tool free of dust and liquids. Use only a clean, soft cloth
for cleaning. Avoid using any solvents.
d. Do not disassemble the self-leveling cross laser; this will expose the user
to hazardous radiation exposure.
e. Do not attempt to change any part of the laser lens.
f. Remove the batteries from the tool and store it in a cool dry location.
g. After you have finished using the tool, always make sure that the switch is
in the off position.
h. Fold in the legs, switch off the laser and set the tool at the lock mode when
the tool is being transported or not in use. Then place the tool in its soft-
bag to protect it against damage.
COMPACT SELF-LEVELING CROSS LINE LASER WITH TRIPOD STAND 11