Troubleshooting - Hammerhead HLCL02 Manual De Instrucciones

TROUBLESHOOTING

PROBLEM
The laser line
projection is weak.
The laser line is hard
to see.
Laser line is not
projected.
12
CAUSE
Battery is weak.
The tool is too far from the
target.
No battery installed or
battery is depleted.
The surface where the
tool has been placed is
uneven or the tool is out of
its automatic self-leveling
range.
COMPACT SELF-LEVELING CROSS LINE LASER WITH TRIPOD STAND
SOLUTION
Replace with a new
battery.
Move the tool closer to
the target.
Install a new battery.
Place the tool on a more
level surface.
Set the tool to its lock
mode.