Kohler K-5293 Guia De Instalacion página 7

Plumbers
Spreader
Putty
Cuspidor
Riser
Assembly
Gasket
3. Install the Spreader
Apply a bead of plumbers putty around the spreader according
to the manufacturer's instructions.
Install the spreader through the cuspidor to the gasket and riser
assembly.
Securely tighten so the riser is positioned at an angle, as shown.
Position the spreader so the holes face the bottom of the cuspidor.
Remove the reducer from the riser assembly, and apply thread
sealant to the reducer.
Thread the reducer into the regulator outlet, and tighten securely.
Kohler Co.
Riser
Assembly
Reducer
Regulator
Outlet
7 105126-2-AC