Kohler K-5293 Guia De Instalacion página 9

Stud Framing
Boxes
Wall Screw
5. Install the Fixtures
Install two wall screws into the bottom of the stud framing boxes,
according to the roughing-in.
Install the fixtures into their respective stud framing boxes, and
hold them in place by hand tightening the cap nuts and washers
to the wall screws. Do not wrench tighten at this time.
Check the fit of the fixtures and all plumbing connections.
Remove the fixtures as needed, and make adjustments.
Reinstall the fixtures when adjustments are completed.
Kohler Co.
Cap Nuts
Washer
9 105126-2-AC