Cleaning And Maintenance - Nuna zaaz Manual De Instrucciones

remove the Seat Cushion
1 To remove the seat cushion, first remove the tray, the safety bar and the
harness restraint if necessary.
2 Insert the Nuna key into the slot at the underside of the seat to release
the plastic clip.
remove the footrest
1 Slide down the lock behind the flap and lift the flap completely.
The seat automatically rises up to the highest position.
2 Firmly flex one end of the footrest and unhook it from the flap.
Unhook the other end and remove it.
3 Remember to lower the flap and listen for the click as the lock
clicks back into position.
Dismantling the Seat from the leg frame
Once the seat is attached to the legs of the chair, it is considered to be a
permanent assembly. However, it is possible to reverse this assembly if the
seat needs to be put into storage or shipped. We recommend this should
not be a regular occurrence.
1 Slide down the lock behind the flap and lift the flap completely.
The seat automatically rises up to the highest position.
2 Gently pull forward the two clips on each side, as illustrated.
3 Slide the seat up and remove from the legs. If the flap is not
completely up, you will not be able to slide the seat upwards.
14
( 2 )
( 4 )
( 2 )
( 12 )
Cleaning and
maintenance
You can clean the high chair and accessories with a damp cloth or a
neutral detergent, but do not use abrasive detergents or solvents which
could damage the material.
The anodised aluminium legs are maintenance free but will be damaged
by impact or scratching.
Continued and extended exposure to sunlight can change the colour of
many materials.
Inspect your high chair regularly in order to detect any damage.
15