Kohler K-6284 Guía De Instalación Y Cuidado página 17

Troubleshooting (cont.)
Symptoms Cause
B. Flush valve
C. Flush valve is
3. Leaks from A. Gaskets not
behind the bowl.
4. Carriage and A. Insufficient
bowl flex when
used.
5. No water flow. A. Supply stop
B. There is an
Kohler Co.
Recommended Action
B. Replace gasket or
gasket or flush flush valve as
valve are necessary.
damaged.
C. Check flush valve and
sticking open. actuating mechanisms
for free movement.
Push button actuators
should raise levers
then spring back
without force. Replace
components as
necessary.
A. Remove the bowl and
positioned inspect all the gaskets.
correctly. Reposition the gaskets
if needed. Lubricate
the gaskets so they
slide in or over the
mating part they seal.
Reinstall the bowl,
making sure the
gaskets stay in the
correct positions.
A. Add additional
support for support members, and
frame. mount the frame with
1/4" or larger lag
screws.
A. Open the supply stop
located in tank (located on the left
is closed. side).
B. Close the external
obstruction in supply stop,
the water line. disconnect the braided
hose where it attaches
to the fill valve. Turn
on the water supply
and check the flow
through the hose.
Continue to
investigate water path
for obstructions. Clear
any blockages.
17 1142998-2-C