Publicidad
Idiomas disponibles
Idiomas disponibles
EN-2
STCON3
6. The sensor is not recommended for
low ionic strength solutions.(<70μS/cm)
7. Clean the probe and shield with
distilled water after use.
8. For Calibration and measurement
procedures, refer to Conductivity Meter
Instruction Manual.
Reagents and Supplies：
1413μS/cm Conductivity Standard
12.88mS/cm Conductivity Standard
Precautions and Limitations：
1. Always have the plastic shield in place
when measuring.
2. Don't expose the probe to organic
solvents when either cleaning or taking
measurements.
3. Don't use the probe outside the
recommended temperature range of 0 to
50
°C.
4. Specification and performance of this
probe is guaranteed only when used with
the appropriate model of Ohaus
Conductivity Meter.
Publicidad
