Fresenius Kabi CompoSeal Universal Instrucciones De Uso página 29

Operating Instructions
CompoSeal Universal
Fresenius Kabi CompoSeal Universal OP-EN 6/07.13
These Operating Instructions are part of the accompanying documents
and thus an integral part of this system. They contain information
necessary for the use of the device. Before the responsible organization
may begin operating the device, the individual responsible for the
operation must have been instructed by the manufacturer on how to use
the device and must be thoroughly familiar with the contents of the
Operating Instructions.
The system may only be operated by individuals who have been
instructed on the proper operation and handling of the system.
The Operating Instructions must be carefully studied before attempting
to operate the system.
Fresenius Kabi reserves the right to change these Operating
Instructions without notice.
Explanation of symbols used in the Operating Instructions:
Note
Informs the operator that failure to follow the steps as specified may
result in the specific function not being executed correctly, not being
executed at all, or not producing the desired effect.
Caution
Advises the operator against certain procedures or actions that could
cause damage to the equipment or may have adverse effects on
individuals.
The system reflects the latest state of technology and complies with the
requirements of:
IEC 61010-1, Edition 3 - Revision date 2013/02/01
UL 61010-1, Edition 3 - Issue Date 2012/05/11
CSA-C22.2 No. 61010-1-12-CAN/CSA, Edition 3 -
Issue Date 2012/05/01
Assembly, extensions, adjustments, modifications or repairs may only
be carried out by the manufacturer or persons authorized by him.
3