Maintenance; Disassembling The Hand Sealer - Fresenius Kabi CompoSeal Universal Instrucciones De Uso

Chapter 6: Maintenance
6

Maintenance

Important documents
CompoSeal Universal /
hand sealer
6.1

Disassembling the hand sealer

14
We generally recommend to conclude a maintenance agreement to
prevent expensive repair work and to ensure an optimum service life of
the device.
The Technical Manual contains circuit diagrams, descriptions and spare
parts lists, and other information. This will be made available to
appropriately trained personnel to assist them when repairing devices.
Contamination of the sealing head may seriously impair the sealing
quality. If the sealer electrodes are contaminated by fluid, sparks may
occur and lead to poor-quality seals. Sparking will be indicated by an
alarm (spark alarm). When the sealing head or the hand sealer is
contaminated, it must immediately be cleaned.
1
2
Disconnect the exchangeable cable from the
hand sealer.
Using your right hand, hold the hand sealer in
a horizontal position.
Firmly close the movable sealing head by
pushing with your middle finger (1), while
exerting a counter-pressure on the
immovable part with your thumb (2)
Compress (3) and abruptly release (4) the
lever.
3
4
Fresenius Kabi CompoSeal Universal OP-EN 6/07.13