Cutting Operation - Pecol V20 Brushless RBPROHP Manual Del Usuario

This power tool has an electronic overload protection system that is activated in the
event of a locking. If you notice that the system has been triggered, shut off the machine,
correct the working conditions and switch it back on.
Although this system has protection, it is only activated with a full lock and the constant
drive tends to degrade the machine. Avoid exposing the equipment to such situations
repeatedly.

3.10. Cutting operation

1. Hold the machine firmly and do not perform side movements to avoid fragmenting the
disc.
2. Position the face or neck always behind the acting plan of the disc.
3. Always use both hands, and with the auxiliary handle installed. Follow the cut in the
direction in which the disc makes the downward movement; the sparks and particles
created by the cut will be projected downwards. Never use cutting disc for deburring.
1.
2.
Região
Safe
segura
zone
Kickback
Forward
direction
3.
Kickback
Rotation
Rotation
FR EN ES
Forward
direction
P.61
PT