Transport And Storage; Contact With Pecol Technical Assistance Service - Pecol V20 Brushless RBPROHP Manual Del Usuario

4.3. Transport and storage

• Always store the power tool with the battery off and with no disc installed.
Protect the battery terminals by insulating them with a tape.
• If long-term storage is required, the battery should always be charged between 50%
and 75% (bright yellow level) and periodic checks of the charge must be carried out.
• Clean the power tool before storing.
• Store in a dry place protected from direct sunlight, dust and excessive heat. The
battery should be stored in a temperature range above 0°C and should not exceed 50°C,
being the ideal range between 10°C and 30°C for a long period.
• In case of drops, transport or prolonged storage, check the general condition of the
power tool. Look for cracks, gaps, loose parts inside, among others, before starting it.
• If it is necessary to carry the batteries, they must comply with the UN3480 and
UN3481guidelines or with the most current version that may become a substitute.

4.4. Contact with PECOL Technical Assistance Service

The Pecol Technical Assistance Service guarantees assistance and repair by a
team of specialised technicians who are always up to date on the most appropriate
procedures, problems and solutions for solving any malfunction or defects in your
electrical equipment. We collect, repair and return your equipment anywhere in
Portugal.
Your questions and technical information will be answered quickly and efficiently.
800 20 29 12
(+351)
sat@pecol.pt
|
FR EN ES
P.63
PT